Proceedings of the
International Conference on Mechanical Engineering 2009
(ICME2009) 26-28 December 2009, Dhaka, Bangladesh

ICME09-KEY-02

THERMAL MANAGEMENT OF CRYOGENIC
STORAGE VESSELS TO PREVENT BOIL OFF

M. M. Rahman
Dept. of Mech. Engg, University of South Florida, Tampa, FL 33620, USA

ABSTRACT

In the recent years, cryogenic storage techniques for liquid hydrogen as well as other liquefied gases are of widely increasing interest. Liquid storage of hydrogen has very significant advantage over gaseous or chemical storage because of much lower storage volume and ease of regeneration of the fuel with its demand. Because of its very low normal boiling point and high latent heat of vaporization, hydrogen’s most challenging aspect in cryogenic storage is the losses due to boil-off under the effect of the heat leak through the insulation layers of the tank from the surrounding environment. Conventional cryogenic storage tanks suffer loss of hydrogen due to boil-off of the cryogen induced by heat leak. In order to control the tank pressure within its structural limits, the stored fluid needs to be bled off periodically. The Zero Boil Off (ZBO) concept has evolved as an innovative means of storage tank pressure control by a synergistic application of passive insulation, active heat removal, and forced mixing within the tank. A cryocooler (with a power supply, radiator, and controls) is integrated into a traditional cryogenic storage subsystem to reject the storage system heat leak. Therefore, the fuel can be stored for a very long time without any loss. This paper presents both steady-state analysis of an active heat dissipation system and the transient analysis of a passive heat dissipation system. The active system includes a tank with cylindrical wall and oblate spheroidal top and bottom and a cold-spray nozzle head whose face is set perpendicular to the axis of the tank. The nozzle head has many nozzles on its down face. The cold fluid from the cryocooler enters the inlet opening at the top of the tank, follows an axial supply tube to the nozzle head and injects into the heated fluid inside the tank through the nozzles. The displaced fluid exits the tank through an annular outlet opening (also at the top of the tank and co-axial to the inlet opening) then goes back to the cryocooler. The passive system includes a tank with cylindrical wall and oblate spheroidal top and bottom, a heat pipe located along the axis of the tank, and an active circulator, which is a pump-nozzle unit including a pump body, a suction tube, and a spray nozzle facing the evaporator section of the heat pipe. The evaporator section removes heat from liquid hydrogen inside the tank and transports it to the external condenser section of the heat pipe that dissipates heat to the ambient via a cryocooler and radiator. The entire system has been modeled numerically by solving equations for the conservation of mass, momentum, and energy. Simulations with different on/off periods for the operation of the pump and different normal speeds of fluid discharged at the nozzle face are run for a parametric analysis. Typical distributions of velocity and temperature are presented. Average speed and maximum temperature are evaluated for assessing mixing and boiling effects, respectively. The effectiveness of the combination of operating parameters is estimated for the optimization of the tank design. The results provide valuable guidelines for the design of ZBO cryogenic storage systems.

Keywords: Cryogenic Storage, Liquid Hydrogen, Active Storage System.

Click here to download full report.

Proceedings of the
International Conference on Mechanical Engineering 2009
(ICME2009) 26-28 December 2009, Dhaka, Bangladesh

ICME09-KEY-01

SMALL ENERGY TECHNOLOGY FOR
EMPOWERING RURAL POOR: BANGLADESH
CONTEXT

S. M. N. Islam
Department of Mechanical Engineering,
Bangladesh University of Engineering and Technology, Dhaka, Bangladesh

ABSTRACT

About half of the population of Bangladesh lives within poverty level. The Millennium Development Goal (MDG) of UNO requires to reduce poverty by one half by 2015, and Copenhagen Declaration demands environmental protection. About 80% of the population lives in rural area and use poor cooking fuel which creates pollution. Most of them are landless and day labor. They have insufficient income to provide for their basic needs. A business model has been designed which the people may use for sustainable rural development in Bangladesh. Sustainable development comprises types of economic and social development that protect and enhance natural environment and social equity. The scanty energy resources of rural area shall be used to attain development to provide basic needs for the poor and to meet MDG target. This paper explores possibilities of attaining rural development through fostering rural power companies based on Renewable Energy Technologies (SET). This will create village businesses for selling power generated from renewable energy technologies. An integrated ecological, economic and social model is proposed to assist sustainable rural development. People of all classes will be a party to share business under this model. The renewable energy technologies (RET) create income generating activities for landless and marginal farmers and for women from such households. The use of renewable technology will reduce deforestation, health hazards and indoor air pollution for cooking with poor quality fuels. The capital cost of Renewable Energy Technology (RET) is little high. This model proposes an extension of well-known micro-credit approach developed by Grameen Bank or BRAC. The target group of village people would form a village organization (VO) like cooperative with the assistance of an external agency composed of NGO, business group and government representatives. The village organization may borrow money from a bank or a large NGO and purchase a RET. The RET may be based on biogas, solar or wind depending upon available sources and locations. The village organization shall sell power to weather members of the society and would repay the loans. Thus they will gain direct ownership and control of the technology and its applications. Here the model is proposed with biogas plant. This will be used to generate power and cooking gas. This is one of the best uses of rural technology to empower the rural poor investing their indigenous skills and resources. Probably the model of this kind can establish gender equity and alleviates poverty to empower the landless poor and protects environment. This model now needs field testing as pilot project.

Keywords: Small Energy Technology, Renewable Energy ,Technology, Poverty Alleviation.

Click here to download full report.